How to Change Code on Brinks Keypad Lock

ByNelson Morgan Last Updated on: Smart Locks

Are you looking to change the code on your Brinks Keypad Lock but not quite sure how to do that? We’re here to help.

In this post, we’ll explain the different codes that come with the Brinks Keypad Lock and how to change/delete any code. Let’s dive in.

How to Change Code on Brinks Keypad Lock

What Codes Does the Brink Keypad Lock Come With?

Brink Keypad Lock comes with a Programming Code and User Code. By default, the lock comes with a 4-digit Programming Code (0000) and one User Code (1234).

The Programming Code lets you change the Lock programming, such as deleting and adding user codes. For instance, if you want to delete a User Code on your lock, you’ll need to first enter the Programming Code to put the lock in programming mode.

And for a User Code, it’s used to unlock the lock via the keypad (as you probably know). You can add up to 6 User Codes and change/delete them at any time.

Now let’s look at how to change any code on a Brinks Electronic Keypad deadbolt—starting with the Programming Code.

How to Change the Programming Code on Your Brinks Keypad Lock?

Here’s how to do that:

  1. Enter the existing Programming Code (the one you want to change) and press the BRINKS button on the keypad.
  2. Press key 4 on the keypad, then press the BRINKS button.
  3. Now enter a new Programming Code (4-10 digits) and press the BRINKS button.

And that’s all you need to do to change the Programming Code on your Brinks Electronic Keypad Deadbolt.

If you don’t remember your existing Programming Code, try the default Programming Code, which is 0000. If it doesn’t work, perform a factory reset on the lock to restore the default codes, then use the default code to reprogram your lock.

If you’re not sure how to restore factory settings on your Brinks lock, scroll to the bottom of this post for guidelines.

How to Change a User Code on Your Brinks Keypad Lock?

As mentioned, a User Code for this lock is a four-digit code that allows you to unlock the lock through the keypad. Note that it’s different from the Programming Code (this is used to change programming settings on the lock).

Here are the steps to follow to change a User Code on your Brinks Keypad Lock:

1. Delete the User Code You Want to Change

So the first step is to delete the code you want to change and here is how to do that:

  • Enter your current Programming Code and press the BRINKS button on the keypad.
  • Press key 2 and then press the BRINKS button.
  • Enter the User Code you want to delete and press the BRINKS button.
  • The lock will blink green and beep once, showing the code is successfully deleted.

2. Replace the Deleted Code

Now the code has been deleted. You can now add a new code to replace it. Here’s how to add a new User Code:

  • Enter the Programming Code and press the BRINKS button.
  • Press key 1 on the keypad, then press the BRINKS button.
  • Enter a new User Code (4-10 digits) and press the BRINKS button.

So that’s it. Your new User Code is now in effect, and it has replaced the deleted one.

You can also choose to remove all the User Codes on your lock at once. Here is how to do that:

  • Enter the Programming Code and press the BRINKS button.
  • Press key 3 on the keypad and press the BRINKS button. This will remove all the User Codes on your Brinks Electronic Keypad Lock.

And if you’ve lost/don’t remember the current programming code for your Brinks Keypad Lock, restore factory default settings on the lock. Then use the default Programming Code to reprogram your lock.

How to Restore Factory Default Settings on Brinks Electronic Keypad Lock?

Here is how to do that:

  1. Remove the battery cover to find the reset button (a circle button labeled “R”).
  2. Insert a pin or paper clip into the hole. Then press and hold it (for about 5 seconds) until the lock beeps three times.
  3. Your lock is now reset.

Note that you have to perform the door handing detection after resetting your lock. This will teach the lock the orientation of your door—whether it’s a right or left-handed door. This is critical to the lock’s operation, and failure to do this may cause some malfunctions in the lock. Read about issues with Brinks Digital Keypad Lock.

That said, here’s how to perform the door handing detection after performing a factory reset:

  1. Enter the default Programming Code (0000) and press the BRINKS button on the keypad.
  2. Press key 0 on the keypad and then press the BRINKS button.
  3. If the process is successful, you’ll hear the lock motto run. Then the lock will flash green twice and beep twice. If not, start the process again.

Wrapping Up

So that’s how to change the codes on your Brinks Electronic Keypad deadbolt. As mentioned, if you forget your Programming Code or User Codes, you can perform a reset on the lock and then reprogram it using the default Programming Code (0000).

You may also like to see how to change codes on Kwikset Keypad Lock, Schlage, and Tru-Bolt Electronic Deadbolt.